The TS HV 50 Hybrid E is a 40 kWh or 64 kWh battery storage system with 25 kW or 29.9 kW hybrid inverter for commercial applications. As a 2-in-1 hybrid storage solution, a PV system can be connected directly to the inverter in addition to the battery storage system to create an ideally harmonised solution. Equipped with an integrated back-up switchover with a switchover time of <10 ms, the inverter allows loads to be supplied on a separate AC output, ensuring that the most important loads are supplied in the event of a grid failure. The range of functions is rounded off with the included energy management system, which allows self-consumption optimization or peak load shaving to be easily implemented.
· 2-in-1 hybrid storage solution in the commercial sector with integrated back-up function (< 10 ms)
· Flexible design of the roof area is possible with 3 MPPTs
· Can be used as a purely AC-coupled battery inverter
· One of the safest storage systems in Europe, certified by TÜV Rheinland
· High-performance battery cells from Samsung SDI for a long service life</li>
· Simple installation and commissioning thanks to harmonized system components
SIMPLEINSTALLATION
AND COMMISSIONING
Prismatic battery cells are incredibly durable, safe and powerful,particularly in comparison to round cells. TESVOLT uses Samsung SDI cells andoffers a 10-year performance guar- antee on the battery modules. Uncompromising Safety: Prioritizes safety withextremely safe cell technology, providing peace of mind and protection for youroperations.
SAFETY, QUALITY
AND DURABILITY
The lifespan of a battery has a huge impact on its economic efficiency. Tesvoltstorage system features outstanding performance: all the components aredesigned to have a lifespan of 30 years or 8,000 cycles. Long-Term Investment: Built to last, with a 30-yeardesign life, providing exceptional value and longevity for your energy storageneeds.
INTUITIVEAND EASY
100% depth of discharge capability and 35% higherenergy density, delivering maximum energy utilization and storage capacity.
The energy management system is generally an integral component of the battery inverter. The SMA version for standard applications is already built in. With the TESVOLT energy management system you can choose from Basic or Pro versions – and there’s a system upgrade option if you change your mind later on. And with a much wider range of future-proof services, it’s a prudent investment in any case.
Self-consumption optimisation
Use more energy from renewable sources and minimise feed-in.
Physical peak shaving
Shave consumption peaks and minimise demand rate costs. The grid connection must be able to supply all loads.
Load control
Consumption optimisation via active connection/disconnection of consumers depending on the energy generated.
Charging station control
Smart control of a single charge (set) point and central controls via the TESVOLT Energy Manager.
Generation control
Consumption optimisation via active connection/disconnection of generators depending on the energy generated in grid operation.
Zero feed-in
VDE FNN-certified fulfilment of grid requirements for not feeding electricity into the utility grid.
Fee-based Pro version
Multi-use
Simultaneous use of two applications (SCO & PS RLM, SCO & ToU, PS & ToU).
Charging stationc control
Smart control of multiple charge (set) points and central controls via the TESVOLT Energy Manager.
Time of use
Time-dependent use of energy features and services.
Forecast-based charging
Depending on the weather forecast, curtailment losses from photovoltaic installations are avoided and self-consumption is optimised.
Direct marketer interface
The PV direct marketer transmits the control signals to the PV installation via the EMS.
Self-consumption optimisation
Physical peak shaving
Zero feed-in
Generation control
Ancillary services
Direct marketer interface
Fast charge
High C-factor (increased battery capacity)
High efficiency
Efficiency greater than 97%
Upgradable system
Possibility to change batteries at any time
Highest safety standards
Control per battery cell
Advanced EMS
Place for text...
Certifikacija
CE, AND 38.3, IEC `
Product warranty
10 years
Capacity guarantee
10 years
Upgradable system
Possibility to change batteries at any time
Lifetime
Up to 30 years
Cycle guarantee
Expected number 8 000, etc…
Documents:
Discover all our solutions for companies
Do you have questions about our energy solutions? Want to learn more about how our technologies can help your business? Contact us and our team of experts will answer your questions and help you find the best solution for your needs.
