Tesvolt TS HV 30-80 E is a 32 kWh to 80 kWh battery storage system with 30 kW or 50 kW battery inverter and can be scaled variably. Using your storage system for standard applications like self-consumption optimization and peak shaving, controlling your charging stations, or using different applications in parallel with the multi-use function – the TS HV 30-80 E is the battery storage system for every usage. With back-up operation pending, in the future the system will also be able to provide reliable power in the case of grid outages.
Complete battery storage package consisting of a cabinet with 4 to 10 battery storage modules including APU and DynamiX Battery Optimizer, a cable set to the inverter, battery inverter and energy meter (Janitza Energy Meter). Choice between TESVOLT energy management incl. myTESWORLD or SMA energy management powered by ennexOS.
MAXIMUM SAFETY
Certified by TÜV Rheinland and is therefore not only one of the most powerful storage systems on the market, but also one of the safest. We achieve this at cell level by using extremely long-lasting, prismatic battery cells from Samsung SDI. At system level we embed a two-pin contactor and monitor the voltage of each individual cell. The whole system is subject to constant plausibility monitoring. If the normalized range is exceeded, the contactors open and the system switches to a safe state. Overall, this means maximum protection for installers, users and investors against damage of any kind.
MAXIMUM EFFICIENCY
Low costs per kilowatt hour of stored energy. This is due to the guaranteed 100% depth of discharge as well as the comparatively low investment costs with increased energy density and reduced space requirements at the same time. With a 10-year system guarantee available for the first time in addition to the 10-year performance guarantee, long-term efficiency is also ensured.
MAXIMUM POWER
Optimised for continuous use in industrial and commercial applications. With 1C maximum power rating, they can store energy very quickly, and release it again just as quickly. The different variants, with the option of connecting up to four systems per inverter, enable an extremely wide range of applications along with high-performance operation.
The energy management system is generally an integral component of the battery inverter. The SMA version for standard applications is already built in. With the TESVOLT energy management system you can choose from Basic or Pro versions – and there’s a system upgrade option if you change your mind later on. And with a much wider range of future-proof services, it’s a prudent investment in any case.
Self-consumption optimisation
Use more energy from renewable sources and minimise feed-in.
Physical peak shaving
Shave consumption peaks and minimise demand rate costs. The grid connection must be able to supply all loads.
Load control
Consumption optimisation via active connection/disconnection of consumers depending on the energy generated.
Charging station control
Smart control of a single charge (set) point and central controls via the TESVOLT Energy Manager.
Generation control
Consumption optimisation via active connection/disconnection of generators depending on the energy generated in grid operation.
Zero feed-in
VDE FNN-certified fulfilment of grid requirements for not feeding electricity into the utility grid.
Fee-based Pro version
Multi-use
Simultaneous use of two applications (SCO & PS RLM, SCO & ToU, PS & ToU).
Charging stationc control
Smart control of multiple charge (set) points and central controls via the TESVOLT Energy Manager.
Time of use
Time-dependent use of energy features and services.
Forecast-based charging
Depending on the weather forecast, curtailment losses from photovoltaic installations are avoided and self-consumption is optimised.
Direct marketer interface
The PV direct marketer transmits the control signals to the PV installation via the EMS.
Self-consumption optimisation
Physical peak shaving
Zero feed-in
Generation control
Ancillary services
Direct marketer interface
Fast charge
High C-factor (increased battery capacity)
High efficiency
Efficiency greater than 97%
Upgradable system
Possibility to change batteries at any time
Highest safety standards
Control per battery cell
Advanced EMS
Place for text...
Certifikacija
CE, AND 38.3, IEC `
Product warranty
10 years
Capacity guarantee
10 years
Upgradable system
Possibility to change batteries at any time
Lifetime
Up to 30 years
Cycle guarantee
Expected number 8 000, etc…
Documents:
Discover all our solutions for companies
Do you have questions about our energy solutions? Want to learn more about how our technologies can help your business? Contact us and our team of experts will answer your questions and help you find the best solution for your needs.
